Publications 

The following publications of Energy Laboratory and related research were released during the past period or are cited as references in this issue. An order form for the MIT Joint Program on the Science and Policy of Global Change is available by request to the MIT Joint Program on the Science and Policy of Global Change, Publications, Room E40-271, Cambridge, MA
02139-4307, tel.: (617) 253-7492; fax: (617) 253-9845; e-mail: tzh@mit.edu. MIT theses may be ordered from the Library Document Services, MIT, Room 14-0551, Cambridge, MA 02139-4307. Other publications may be ordered from Energy Laboratory Publications, MIT, Room E40-473, Cambridge, MA 02139-4307, only if a price is assigned and only if prepaid by check payable to "MIT Energy Laboratory." Prices are postpaid surface mail. For air delivery, add 15% to US, Canada, and Mexico, and 30% elsewhere. A list of publications is available on request.

Bailey, E. Allowance Trading Activity and State Regulatory Rulings: Evidence from the US Acid Rain Program. March 1998. Center for Energy and Environmental Policy Research Working Paper No. MIT-CEEPR 98-005. 38 pages. $10.00

Bailey, E. Intertemporal Pricing of Sulfur Dioxide Allowances. March 1998. Center for Energy and Environmental Policy Research Working Paper No. MIT-CEEPR 98-006. 17 pages. $10.00

Ellerman, A., T. Stoker, and E. Berndt. Sources of Productivity Growth in the American Coal Industry. March 1998. Center for Energy and Environmental Policy Research Working Paper No. MIT-CEEPR 98-004. 64 pages. $12.00

Schennach, S. The Economics of Pollution Permit Banking in the Context of Title IV of the 1990 Clean Air Act Amendments. May 1998. Center for Energy and Environmental Policy Research Working Paper No. MIT-CEEPR 98-007. 49 pages. $10.00

Adams, E., J. Caulfield, H. Herzog, and D. Auerbach. "Impacts of reduced pH from ocean CO₂ disposal: sensitivity of  zooplankton mortality to model parameters." Waste Management, v. 17, no. 5/6, pp. 375-380, 1997.

Ahmad, B., Y. Zhang, and P. Barton. "Product sequences in azeotropic batch distillation." AIChE Journal, v. 44, no. 5, pp. 1051-1070, May 1998.

Barton, P., J. Banga, and S. Galan. Optimization of Discontinuous Dynamic Systems. Presented at 16th Symposium on Energy Engineering Sciences, Argonne, Illinois, May 13-15, 1998. 8 pages. $10.00

Cheng, W., T. Summers, and N. Collings. "The fast-response flame ionization detector." Progress in Energy Combustion Science, v. 24, pp. 89-124, 1998.

Cheong, W. Simulation and Analysis of a Middle Vessel Batch Distillation Column. BSc thesis. MIT Department of Chemical Engineering, Cambridge, Massachusetts, June 1998.

Chun, J.-H., R. Lanza, and N. Saka. Solid-Liquid Interface Detection in Continuous Casting Processes by Gamma-Ray Attenuation. US Patent No. 5,509,460, Massachusetts Institute of Technology, 1996. For Adobe Acrobat PDF file, go to World Wide Web: <http://mv.ezproxy.com.ezproxyberklee.flo.org/castscan/publicat.htm>.

Chun, J.-H., R. Lanza, N. Saka, and M. Hytros. "On-line monitoring of the solidification front in metal casting." Annals of the CIRP (International Institute for Manufacturing Research), v. 44, pp. 181-184, 1995. For Adobe Acrobat PDF file, go to World Wide Web: <http://mv.ezproxy.com.ezproxyberklee.flo.org/castscan/publicat.htm>.

de Figueredo, A., Y. Sumartha, and M. Flemings. "Measurement and calculation of solid fraction in quenched semi-solid melts of rheocast aluminum alloy A357." Light Metals 1998, San Antonio, Texas, February 15-19, 1998. Warrendale, Pennsylvania: The Metallurgical Society, 1998.

Eberman, K., P. Onnerud, T.-H. Yu, H. Tuller, and B. Wuensch. "Rietveld X-ray powder profile analysis and electrical conductivity of fast-ion conducting Gd₂(Ti_1-ySn_y)₂O₇ solid solutions." In Solid-State Chemistry of Inorganic Materials, eds., P. Davies, A. Jacobson, C. Torardi, and T. Vanderah. Materials Research Society Symposium Proceedings, v. 453, pp. 567-572, 1997.

Ellerman, A. "Note on the seemingly indefinite extension of power plant lives, a panel contribution." The Energy Journal, v. 19, no. 2, pp. 129-132, 1998.

Flemings, M. "Behavior of metal alloys in the semisolid state." The 1990 Edward Campbell Memorial Lecture, American Society of Materials International. Metallurgical Transactions B, v. 22, pp. 269-293, June 1991.

Flemings, M. "Solidification." Advanced Physical Chemistry for Process Metallurgy, eds., M. Maeda, N. Sano, W. Lu, and P. Riboud. San Diego, California: Academic Press, 1997. Chapter 5, pages 151-182.

Flemings, M. Solidification Modeling, Past and Present. Presented at Modeling of Casting, Welding, and Advanced Solidification Processes VIII, San Diego, California, June 8-12, 1998. 13 pages. $10.00

Flemings, M. Solidification Science and Engineering Practice. Materials Research Society David Turnbull Lecture, November 28, 1997. Journal of Materials Research, forthcoming, 1998.

Flemings, M., A. de Figueredo, and Y. Sumartha. Processing and Flow Behavior of Aluminum Alloy A 356 in the Semi-Solid State. Final Report to the INEEL University Research Consortium, Lockheed Martin Idaho Technologies, September 1997. 45 pages. $10.00

Galan, S., and P. Barton. "Dynamic optimization of hybrid systems." Computers in Chemical Engineering, v. 22, Supplement, pp. S183-S190, 1998.

Garrett, C., and G. Apostolakis. Context and Software Safety Assessment. Presented at 2nd Workshop on Human Error, Safety, and System Development, Seattle, Washington, April 1-2, 1998. 12 pages. $10.00

Hytros, M. A Feasibility Study of Solidification Front Monitoring via Tomographic Imaging. SM thesis. MIT Department of Mechanical Engineering, Cambridge, Massachusetts, 1996. For Adobe Acrobat PDF file, go to World Wide Web: <http://mv.ezproxy.com.ezproxyberklee.flo.org/castscan/publicat.htm>.

Hytros, M., J.-H. Chun, R. Lanza, and N. Saka. "A solidification front monitor for metal casting." Advanced Materials: Development, Characterization, Processing, and Mechanical Behavior, American Society of Mechanical Engineers International Mechanical Engineering Congress and Exposition, Atlanta, Georgia, pp. 145-146, 1996. For Adobe Acrobat PDF file, go to World Wide Web: <http://mv.ezproxy.com.ezproxyberklee.flo.org/castscan/publicat.htm>.

Hytros, M., J.-H. Chun, R. Lanza, and N. Saka. "A solidification front monitor for metal casting." Journal of Manufacturing Science and Engineering, forthcoming, 1998.

Hytros, M., I. Jureidini, D. Kim, J.-H. Chun, R. Lanza, and N. Saka. "A computed tomography sensor for solidification in metal casting." Sensors and Modeling in Materials Processing: Techniques and Applications, Symposium Proceedings, 126th Annual Meeting of The Metallurgical Society, Orlando, Florida, pp. 173-181, 1997. For Adobe Acrobat PDF file, go to World Wide Web: <http://mv.ezproxy.com.ezproxyberklee.flo.org/castscan/publicat.htm>.

Ilic, M., F. Galiana, and L. Fink. Power Systems Restructuring: Engineering and Economics. Boston: Kluwer Academic Publishers, 1998.

Jacoby, H., R. Prinn, and R. Schmalensee. The Road From Kyoto. March 1998. MIT Joint Program on the Science and Policy of Global Change Report No. 32. 9 pages.

Joskow, P. "Electricity sectors in transition." The Energy Journal, v. 19, no. 2, pp. 25-52, 1998.

Jureidini, I. A Design for a High Energy X-Ray Computed Tomography Sensor for the Study of Solidification Fronts in Aluminum. SM thesis. MIT Department of Nuclear Engineering, Cambridge, Massachusetts, 1997. For Adobe Acrobat PDF file, go to World Wide Web: <http://mv.ezproxy.com.ezproxyberklee.flo.org/castscan/publicat.htm>.

Kim, D. The Design of a Gamma-Ray Tomographic Sensor for Detecting Mushy Zone in Continuous Casting. SM thesis. MIT Department of Mechanical Engineering, Cambridge, Massachusetts, 1996.

Marrone, P., T. Arias, W. Peters, and J. Tester. Solvation Effects on Kinetics of Methylene Chloride Reactions in Sub- and Supercritical Water: Theory, Experiment, and Ab Initio Calculations. Submitted to Journal of Physical Chemistry, 1998. 66 pages. $12.00

Marrone, P., P. Gschwend, K. Swallow, W. Peters, and J. Tester. Product Distribution and Reaction Pathways for Methylene Chloride Hydrolysis and Oxidation under Hydrothermal Conditions. Accepted for publication in Journal of Supercritical Fluids, 1998. 16 pages. $10.00

Porat, O., H. Tuller, M. Shelef, and E. Logothetis. "Electrical conductivity and nonstoichiometry in Pr_0.545Ce_0.455O_2-x." In Solid-State Chemistry of Inorganic Materials, eds., P. Davies, A. Jacobson, C. Torardi, and T. Vanderah. Materials Research Society Symposium Proceedings, v. 453, pp. 531-535, 1997.

Renslo, A., R. Weinstein, J. Tester, and R. Danheiser. "Concerning the regiochemical course of the Diels-Alder reaction in supercritical carbon dioxide." Journal of Organic Chemistry, v. 62, pp. 4530-4533, 1997.

Sabioni, A., T. Yu, and H. Tuller. "Oxygen diffusion in a pyrochlore oxide of composition (Gd_0.9964Ca_0.0036)₂Sn₂O₇." In Ionic and Mixed Conducting Ceramics III, eds., T. Ramanarayanan, W. Worrell, H. Tuller, A. Khandkar, M. Mogensen, and W. Gopel. Electrochemical Society Symposium Proceedings, v. 97-24, pp. 827-833, 1998.

Sumartha, Y., A. de Figueredo, and M. Flemings. Flow Behavior of Semi-Solid Aluminum Alloys A356 and A357. To be presented at the 5th Conference on Semi-Solid Processing of Alloys and Composites, Golden, Colorado, June 23-25, 1998. 11 pages. $10.00

Sun, T., and J. Ying. "Synthesis of microporous transition metal oxide molecular sieves with bifunctional templating molecules." Angewandte Chemie, International Edition in English, v. 37, no. 5, pp. 664-667, 1998.

Tuller, H. "Solid state electrochemical systems-opportunities for nanofabricated or nanostructured materials." Journal of Electroceramics, v. 1, no. 3, pp. 211-218, 1997.